Remote Handlebar Lock-out Lever Installation The remote lock-out lever can be installed above or below the handlebar on either the left or right side. The lever comes pre-assembled to be mounted on the top of the handlebar on the right side. To re-orient the lever, remove the lever assembly from the clamp assembly with a 2 mm. hex wrench. Mount clamp assembly in desired location and re-mount the lever assembly. DO NOT overtighten the mounting screws. To adjust the lever friction, use a 3 mm hex wrench to tighten or loosen the button head head screw in the middle of the lever housing. Use an 8mm. socket to hold the nut on the bottom of the lever housing. |
